Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

alloy 200 nickel cutting

Status
Not open for further replies.
thermeng2

thermeng2

Mechanical
Joined
Jan 29, 2003
Messages
24
Location
US
Does anyone know how .01 alloy 200 nickel will cut. I need to guess at the feed rate. I have a Mazak stx 48. 1500 watt laser. If you have cut conditions that wouls really help.
Thanks
 
Sort by date Sort by votes
I would treat it like stainless with N2 assist for starters. Just go slow at first, just remember slow is safe but can cause dross so speed it up if you see dross.

Chris Krug
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

B
  • Question Question
Will there be problems with the cutting section if the laser cutting speed is too fast or too slow?
Replies
3
Views
451
IRstuff
IRstuff
Garrett Green
  • Locked
  • Question Question
Mazak Laser having trouble cutting 1/2" Material
Replies
0
Views
1K
Garrett Green
Garrett Green
Hans H.
  • Locked
  • Question Question
Anti spatter for laser cutting?
Replies
1
Views
1K
Rex Hang
Rex Hang
Pablo_Garcia
  • Locked
  • Question Question
Seeking Guidance: Choosing the Right Laser Cutting Machine for Beginners
Replies
0
Views
922
Pablo_Garcia
Pablo_Garcia
Majidtaherkazemi
  • Locked
  • Question Question
amada cutting laser
Replies
0
Views
342
Majidtaherkazemi
Majidtaherkazemi

Part and Inventory Search

Sponsor

Back
Top