Allowable stress number for 17-4PH

[haarup]

I've been trying to find allowable bending stress number and contact stress number for 17-4PH. I checked several books but they all omit stainless steel for some reason.

If anyone has a value or a source, which has the allowable numbers I will be very grateful.

 

[Carburize]

I checked AGMA 2001 and ISO 6336-5 and there is no information for 17-4PH in either of these two documents.

 

[madafrican]

Try this site.

http://www.matweb.com/index.asp?ckck=1