Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Allowable misalignment

Status
Not open for further replies.
bizsheets

bizsheets

Structural
Joined
Jul 7, 2010
Messages
6
Location
US
Can anyone site a reference in B31.3 that addresses the allowable amount of misalignment with regards to 1/2" tubing?
 
Sort by date Sort by votes
Allowable misalignment between pieces of tubing joined in what manner?
 
Upvote 0 Downvote
Sorry, Orbital welder, GTAW process.
 
Upvote 0 Downvote
Found it: 328.4.3 Alignment and K328.4.3 Alignment
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Drilling Integrity Super.
  • Locked
Formula for Calculating Basic Allowable Stresses in ASME B31.3
Replies
2
Views
5K
Geoff13
Geoff13
shiraz883
  • Locked
  • Question Question
ASME vs EN 13445| EN 12953 | Allowable stress for EN materials in ASME Sec II part D (Metric)
Replies
3
Views
885
XL83NL
XL83NL
LP2111
  • Locked
  • Question Question
SAME MATERIAL WITH DIFFERENT ALLOWABLE STRESS
Replies
8
Views
514
Pengar
Pengar
Design-Engineer
  • Locked
  • Question Question
ASME II Part D - Allowable Stress
Replies
4
Views
2K
Design-Engineer
Design-Engineer
Lucaclz
  • Locked
  • Question Question
Allowable stress for B8M bolting
Replies
2
Views
394
Lucaclz
Lucaclz

Part and Inventory Search

Sponsor

Back
Top