Eng-Tips is the largest forum for Engineering Professionals on the Internet.
Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!
-
Congratulations dmapguru on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Aligning drawing views permanently 1
- Thread starter Finglas
- Start date
-
1
- #2
JohnRBaker
Mechanical
Sorry, a view cannot be linked to another view so that it moves when the referenced view moves. However you can select more than one view and the move them together so that they remain aligned.
Also you do not have go to the Edit -> View function to move or align a view, just select the view with the cursor and hold it down to drag it to where you need it to be and as you pass by another view it will 'snap' into alignment automatically.
John R. Baker, P.E.
Product 'Evangelist'
Product Design Solutions
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
To an Engineer, the glass is twice as big as it needs to be.
Also you do not have go to the Edit -> View function to move or align a view, just select the view with the cursor and hold it down to drag it to where you need it to be and as you pass by another view it will 'snap' into alignment automatically.
John R. Baker, P.E.
Product 'Evangelist'
Product Design Solutions
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
To an Engineer, the glass is twice as big as it needs to be.
- Status
