Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Air To air Heat Exchangers

Status
Not open for further replies.
TraneMan

TraneMan

Mechanical
Joined
Aug 22, 2005
Messages
3
Location
US
The following question is in regards to energy recovery wheels (Enthalpy wheels). The effectiveness defined by ASHRAE can be in terms of Total, Moisture or Sensible effectiveness. If given an effectiveness of 78% is this assumed to be total, sensible or Latent (moisture)? In other words are there three different effectiveness values for each enthalpy wheel? Or can one effectiveness value be used interchangably?

Thanks
 
Status
Not open for further replies.

Similar threads

J
  • Question Question
4 pipes reversible air source heat pump model in hap
Replies
1
Views
7K
LittleInch
LittleInch
123131415
  • Question Question
Control Air Damper selection
Replies
0
Views
2K
123131415
123131415
V
  • Question Question
air recirculated by means of room units
Replies
0
Views
3K
Vinny-wong
V
V
  • Question Question
Is VRF allowed for use in patient rooms? Are the air supply outlets of indoor units also required to meet the MERV 14 filtration level?
Replies
6
Views
11K
Vinny-wong
V
HVAC-Novice
  • Locked
  • Question Question
Flex connector needed for gas connection to suspended make-up air unit?
Replies
5
Views
4K
BLee_PE
BLee_PE

Part and Inventory Search

Sponsor

Back
Top