Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Air Cored Shunt Reactor Inrush

Status
Not open for further replies.
MattMag

MattMag

Electrical
Jul 17, 2003
9
Does anyone know what the typical inrush magnitude and time to decay is for a shunt connected air cored reactor ? I would imagine it can be a maximum of 2 x rating as there will be no remenant flux, and will be over with pretty quick due to no iron to be magnetized. I'm looking at a reactor size of approx 1 MVAr (3 phase) at 415V.

Thanks...
 
Status
Not open for further replies.

Similar threads

hhhansen
  • Locked
  • Question
Shunt reactor
Replies
0
Views
661
hhhansen
hhhansen
aslamajec123
  • Locked
  • Question
Shunt reactor impact on cable charging current
Replies
6
Views
2K
aslamajec123
aslamajec123
aslamajec123
  • Locked
  • Question
Contribution of shunt reactor in reducing the cable charging current
Replies
1
Views
1K
cuky2000
cuky2000
HenryOhm
  • Question
Probability Distribution of Transformer Inrush 5
Replies
5
Views
613
waross
waross
DrDrreeeaaa
  • Question
Testing Procedures - Transformer Protection, Bus Zone Protection, Feeder, Reactor
Replies
0
Views
3K
DrDrreeeaaa
DrDrreeeaaa

Part and Inventory Search

Sponsor

Back
Top Bottom