After using Routing module Define deformable part no longer available.

[NutAce]

Hi All...

Has anybody encountered the issue where the Define Deformable Part menu dissapears of you have used Routing Mechanical?
Even when I switch to modeling it won't come back.
I need to first close NX, then open a model which has been saved in modeling before I get the menu back...
I have never noticed this in NX8.5.2 only in NX8.5.3



Ronald van den Broek
Mechanical Engineer
Cad Environment Coordinator
Wärtsilä, Propulsion Services
NX8.5.3 / TC9.1.2
HPZ420 Intel(R) Xeon(R) CPU E5-1620 0 @ 3.60GHz, 32 Gb Win7 64B
Nvidea Quadro4000 2048MB DDR5

 

[JohnRBaker]

If you can demonstrate that this has changed in NX 8.5.3, please contact GTAC and have them open an IR/PR.

John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
Siemens PLM:
UG/NX Museum:

To an Engineer, the glass is twice as big as it needs to be.

 

[NutAce]

Hi.

Cannot reproduce this in NX8.5.2
Created an IR/PR with Gtac.

Ronald van den Broek
Mechanical Engineer
Cad Environment Coordinator
Wärtsilä, Propulsion Services
NX8.5.3 / TC9.1.2
HPZ420 Intel(R) Xeon(R) CPU E5-1620 0 @ 3.60GHz, 32 Gb Win7 64B
Nvidea Quadro4000 2048MB DDR5