Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Advanced Simulation - Two meshes get the same nodes

Status
Not open for further replies.

Wetblunt

Mechanical
Joined
Oct 5, 2012
Messages
9
Location
SE
Hello,

I need help creating two or more meshes where I get different node numbers in the borders between these.

If I just create a box (10x10x10) and then create two mesh collectors and two different 2d-meshes:

mesh_brxyzj.png


How do I avoid getting the same node on the two different meshes?

First_p5la9m.png


second_sm3lpb.png



Best Regards
 
Hello,

Extracting the faces individually may help?



regards,
Mathi Krishnan
NX10.0.1.4 D4
 
Do you mean using extract geometry before meshing? Will try that but it doesnt sound like a smooth solution :)
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top