Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Add vertex to chamfer dimension

Status
Not open for further replies.
mdambros

mdambros

Mechanical
Joined
May 11, 2007
Messages
8
Location
US
I have a dimension .004 X 45 degrees created with the CHAMFER DIMENSION command. I used the Callout Perpendicular under the Properties. It pulls a leader off with the chamfer dimension. Is it possible to add a vertex to the leader now? I know you can do it with leaders by using the ALT key while selecting the leader line, but I can't get it to work with the chamfer dimension.

Thanks
 
Status
Not open for further replies.

Similar threads

J
  • Locked
  • Question Question
VBA to Pull Total Surface Area and Volume for a Part of an Assembly?
Replies
0
Views
1K
jdconnel
J
Vikas4auto2019
  • Locked
  • Question Question
How to add bulk components in to the assembly.
Replies
0
Views
926
Vikas4auto2019
Vikas4auto2019
jcpalekar
  • Locked
  • Question Question
How to handle occurrence properties of solid edge through excel sheet?
Replies
0
Views
1K
jcpalekar
jcpalekar
NirVidP
  • Locked
  • Question Question
How to 'Create Part In Place' using vba?
Replies
0
Views
967
NirVidP
NirVidP
NZMark
  • Locked
  • Question Question
Dimension scaling of drawing objects in Draft
Replies
3
Views
2K
kjoiner
kjoiner

Part and Inventory Search

Sponsor

Back
Top