Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

add thickness to STL file

Status
Not open for further replies.
alimahmoudh

alimahmoudh

Bioengineer
Joined
Apr 7, 2011
Messages
5
Location
EG
Hi ,

I have STL file , I want to add thickness to it and apply displacement to part of it

how can I do that in ansys
you can download the file from
any tutorial , any suggestion will be highly appreciated
 
Status
Not open for further replies.

Similar threads

LS_SMS
  • Locked
  • Question Question
Zero Through-Thickness Bending Stress
Replies
9
Views
1K
TGS4
TGS4
Sayed Ghalleby
  • Locked
  • Question Question
ansys *.cbd file to abaqus
Replies
0
Views
471
Sayed Ghalleby
Sayed Ghalleby
M
  • Question Question
spaceclaim to STEP format, Help needed.
Replies
2
Views
20K
mosenansi
M
alpha000
  • Locked
  • Question Question
Bend straight beam to circular helix
Replies
1
Views
2K
Doug Hunter
Doug Hunter
AndrewSkocz
  • Locked
  • Question Question
Ansys - Solving an input file using command line
Replies
3
Views
1K
NRP99
NRP99

Part and Inventory Search

Sponsor

Back
Top