RattlinBog
Structural
- May 27, 2022
- 187
I'm fairly new to the design requirements of ACI 350-20. I wanted to compare the calculation of load factors and the environmental durability factor, Sd, using both Appendix D and Chapt. 9. App. D is straightforward, but Chapt. 9 is a bit tricky. It looks like Chapt. 9 can be more or less conservative than App. D depending on reinforcement spacing.
Would someone be willing to review my attached example calcs and confirm if I'm on the right track? I only checked flexural stress under fluid loads and normal environmental exposure for the example.
Would someone be willing to review my attached example calcs and confirm if I'm on the right track? I only checked flexural stress under fluid loads and normal environmental exposure for the example.
