We are beginning design on a new 8 story steel framed office structure in Tennessee and the Architect has set up an appointment in a few months for us to coordinate the steel frame with the accoustical engineer. Silly question, but would anyone happen to know what the accoustical engineer might have to do with the steel frame before i go and ask?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Accoustical Engineer Consultation with Structural Engineer 1
- Thread starter Galambos
- Start date
-
1
- #2
Noise is transmitted in structures in a variety of ways. One specific concern is that of "flanking" where sound is transmitted through floors into walls or reverse. Also, some structural systems are designed to mitigate sound transmission, particularly floor to ceiling noises (Hambro floor systems, for instance). The meeting is probably to coordinate the required sound transmission levels with the structural system.
Ask the architect for the use of the building, and his concerns of sound transmission as pointed out by Ron. The building, or an certain part of it, would be used as recording studio, indoor theatre, which would require the coordination among the architect, the accoustical engineer, and the structural guys (minor, I guess). Also, is there an out door source, such as busy highway, that produces high level noise, this is obviously another matter may require attention (required barrier and support).
- Status
Similar threads
- Locked
- Question
- Locked
- Question
