Eng-Tips is the largest forum for Engineering Professionals on the Internet.
Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!
-
Congratulations dmapguru on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
acceptance specs of solder void
- Thread starter limct
- Start date
There are no real acceptance levels for consumer electronics. the soldering standards are there to be a reference when jobs are submitted between a supplier and his customer. You decide what is acceptable or not, balancing between the cost of the reworks or of the rejects, versus the long term life of the product and the financial health of your company.
Voids can be acceptable when you understand why they are present. But as per manufacturing standards, the inspector can reject a whole lot of parts and ruin your sales because that's what it says in the spec and that he does his job. I have seen numerous battles between QC departments and production managers because of that.
Voids can be acceptable when you understand why they are present. But as per manufacturing standards, the inspector can reject a whole lot of parts and ruin your sales because that's what it says in the spec and that he does his job. I have seen numerous battles between QC departments and production managers because of that.
- Status
Similar threads
- Locked
- Question
- Question