Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Acceptance Criteria for calibration of eddy current equipment
- Thread starter QA Man
- Start date
EdStainless
Materials
If you look in the practice spec (the E spec) it should comment on this.
For our electronics calibrations we rely on the equipment manufacture.
They have standard response curves for the detection circuits.
= = = = = = = = = = = = = = = = = = = =
P.E. Metallurgy, Plymouth Tube
For our electronics calibrations we rely on the equipment manufacture.
They have standard response curves for the detection circuits.
= = = = = = = = = = = = = = = = = = = =
P.E. Metallurgy, Plymouth Tube
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked