Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Acceptance Criteria for calibration of eddy current equipment

Status
Not open for further replies.

QA Man

Aerospace
Mar 21, 2019
1
TH
Is there a published ASTM standard to use in determining acceptance/rejection of an eddy current unit from an ISO 17025 Accredited Lab. Our EASA audit is coming due and I have been informed that this is one of their issues this year.
 
Replies continue below

Recommended for you

If you look in the practice spec (the E spec) it should comment on this.
For our electronics calibrations we rely on the equipment manufacture.
They have standard response curves for the detection circuits.

= = = = = = = = = = = = = = = = = = = =
P.E. Metallurgy, Plymouth Tube
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor