Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
ACAD TEXT
- Thread starter dbrlogan
- Start date
If you dont have the express package the only possible way I can think of to do arc aligned text would be a "manual" sort of way. That is to write each letter as an individual text and the use the rotate command to rotate each letter separatly, This would take a hell of a long time-but if it's that important it might be worth considering.
With gpavlab recommendation, make sure to generate an arc
subdivided with equal radial lines, then the letters can be equally spaced at the intersections of the arc and radial lines in order to get a uniform presentation. The degrees of rotation the letters can be determined from the angular positions of the radial lines. Invoke the LI command on the radial lines for their angular positions.
subdivided with equal radial lines, then the letters can be equally spaced at the intersections of the arc and radial lines in order to get a uniform presentation. The degrees of rotation the letters can be determined from the angular positions of the radial lines. Invoke the LI command on the radial lines for their angular positions.
"Everybody is ignorant, only on different subjects." — Will Rogers
- Thread starter
- #7
- Status
Similar threads
- Locked
- Question