Abaqus scripting odb access

[yogaston]

Hello

I'm trying to retrieve the natural frequencies from the odb file. Can anybody help me out?

Thanks

 

[tgrimley]

Add a history output for eigenfrequencies, then run your job, plot the eigenfrequencies results in Abaqus/CAE. Now look at information window and see where the *.rpy file is put, and open that in a text editor. It will have the python commands of everything you did in CAE.

 

[yogaston]

tgrimely:

thank you very much. I found the command by trial and error, but your method seems easier.