Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Abaqus, pressure load pointing in various direction

Status
Not open for further replies.
bogiedreamer

bogiedreamer

Mechanical
Joined
Apr 14, 2005
Messages
57
I have an axissymmetric model with the pressure energizing the cavity of a u-cup seal. However, when I apply the pressure to the cavity of the seal, the pressure direction is pointing in both direction. Is this a problem?
 
Status
Not open for further replies.

Similar threads

I
  • Question Question
Wear in abaqus
Replies
8
Views
15K
Rama27
R
otaviobarodrigues
  • Question Question
Pipe pressure load with analytical field and hydrostatic pressure
Replies
2
Views
8K
otaviobarodrigues
otaviobarodrigues
A
  • Solved
Applying Local Coordinate System for BC in Abaqus
Replies
1
Views
4K
FEA way
FEA way
jball1
  • Question Question
Accumulation of error in Abaqus Explicit?
Replies
4
Views
771
FEA way
FEA way
mj345
  • Question Question
Selecting the arcs in ABAQUS/CAE
Replies
2
Views
408
mj345
mj345

Part and Inventory Search

Sponsor

Back
Top