Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

  • Congratulations dmapguru on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Abaqus Parametric Study

Status
Not open for further replies.

prabhavborate

Mechanical
Joined
Feb 28, 2016
Messages
4
Location
US
In Abaqus I have modeled 1D Cantilever Beam with 200 elements and 2 sets named "Damage element set" and "Healthy elements set". Damage set has 1 element and Healthy set has remaining 199 elements. I have to do simulation 200 times by changing both sets every time.
e.g. for 1st simulation element number 1 will be in damage set and remaining elements will be in healthy set, for 2nd simulation element number 2 will be in damage set and remaining elements will be in healthy set.....like that 200 cases and its simulation.
So anyone has any idea about how to perform such large number of simulations without manually doing it?
 
Abaqus Analysis User's Guide - 20.1.1 Scripting parametric studies

This provides a good overview of the commands needed to script a parametric study.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top