Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

abaqus in fem mode

  • Thread starter Thread starter Israr
  • Start date Start date
I

Israr

Guest
For the first time I have seen this in Wildfire 3.0


fem_default_solver ansys/nastran/abaqus


My question is how to configure it. Anybody who has done it.


Israr
 
You must log in or register to reply here.

Similar threads

bbLTI
  • Locked
  • Question Question
Force vs. Displacement in Creo Simulate
Replies
0
Views
944
bbLTI
bbLTI
R
Point Force in Mechanism
Replies
0
Views
48K
rework
R
Glenn Gordon
  • Locked
  • Question Question
Rigid Link Loading in Creo Simulate
Replies
1
Views
1K
davidh729
davidh729
Bobfromoh
  • Locked
  • Question Question
Bolting in Axisymmetric model
Replies
0
Views
731
Bobfromoh
Bobfromoh
T
Angle analysis feature to be used as a dimension in a drawing table
Replies
1
Views
14K
annad_m_s
A

Part and Inventory Search

Sponsor

Back
Top