Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ABAQUS HOMOGENEIZATION

Status
Not open for further replies.

ZioPeter

Materials
Joined
Feb 11, 2010
Messages
1
Location
IT
I address you, hoping someone can help me.
I am doing simulations with Abaqus on representative volumes (RV) of heterogeneous materials, particularly textiles.
My goal is to make homogeneus the material by an average volume of stresses in performing this RV.

In that regard, I would like to know if there is a way on how to calculate the volume do each finite element, multiplied by the relative stress (Gauss point) and add them all together. Finally, the result will be divided by the total volume of the model, obtaining the average value of a particular component of the stress.

Thanks

Pietro
 
Hi,

I think that it may be possible to ask for all those quantities using UVARM, USDFLD subroutines with the utility routine GETVRM.

The volume at Integration Point should be referenced as IVOL.

Hope it'll help.

Regards

Rgx
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top