Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

Register Log in
  • Congratulations dmapguru on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Abaqus Compression after impact test

Status
Not open for further replies.
es0007

es0007

Materials
Joined
Nov 24, 2011
Messages
2
Location
GB
Hi all,

I am trying to simulate Compression after impact tests with Abaqus. I made the modelling and checking the results.

My questuion is which values I need to consider to find out residual strenght on the materials. For example: Mises, Max.Principal, Mid. Principal,Pressure vs..

Thanks all

 
Status
Not open for further replies.

Similar threads

HITVIP
  • Locked
  • Question Question
Abaqus: Why Viewport Shows Extra Border After Matplotlib Plot
Replies
0
Views
2K
HITVIP
HITVIP
A
  • Locked
  • Question Question
ABAQUS cmd line job seemingly freezes after a long time
Replies
1
Views
2K
FEA way
FEA way
Faiz1
  • Locked
  • Question Question
ABAQUS Explicit-Multiple Particles Impact-Need to stop bouncing after impact
Replies
4
Views
803
Faiz1
Faiz1
I
  • Question Question
Abaqus Subroutine: Gapelectr
Replies
1
Views
10K
FEA way
FEA way
vikram manoj
  • Question Question
Abaqus-Isight
Replies
5
Views
17K
snow83
S

Part and Inventory Search

Sponsor

Back
Top