Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Abaqus benchmark

Status
Not open for further replies.
mikechy

mikechy

Mechanical
Joined
Sep 18, 2008
Messages
37
Location
US
Hello,
I just wonder if anyone tried Abaqus benchmark "1.1.4 Thick composite cylinder subjected to internal pressure"? I've tried all of it: thickcompcyl_2el_nonuniform.inp , thickcompcyl_1el_sectorient.inp , thickcompcyl_4el_orient.inp , and thickcompcyl_8el.inp and neither one give result even close to value into Table 1.1.4–1. Any idea why it's so? Thanks.
 
Sort by date Sort by votes
Have you transformed the results to cylindrical CSYS ? Also, the values given in the tables are normalized with respect to pressure.
 
Upvote 0 Downvote
Thank you, FEA way.
My bad, I didn't notice that the result was normalized. Problem solved.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

vikram manoj
  • Question Question
Abaqus-Isight
Replies
5
Views
16K
snow83
S
A
Abaqus help
Replies
2
Views
8K
ArijitME
A
I
  • Question Question
Wear in abaqus
Replies
8
Views
15K
Rama27
R
I
  • Locked
  • Question Question
Abaqus subroutine
Replies
3
Views
3K
FEA way
FEA way
I
Abaqus Subroutine
Replies
4
Views
6K
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top