Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

A706 Gr60 rebar welded to P8 stainless steel plate 1

Status
Not open for further replies.
matschka

matschka

Materials
Joined
Apr 23, 2002
Messages
53
Location
US
What tests are required to qualify a PQR for welding A706 Gr60 reinforcing bars to a P8 stainless steel plate to be used as an embed in concrete. All welding will be performed in the flat position.
 
Sort by date Sort by votes
This typically falls under the jurisdiction of AWS D1.4. It will outline the required qualifications based on joint geometry and a number of other variables.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

JT0202
  • Question Question
AWS D1.1 2020 Group I to Group II Material PQR
Replies
0
Views
2K
JT0202
JT0202
naquib
  • Locked
  • Question Question
WPS Qualification AWS D1.1 2020, Box to Box WPS Sample
Replies
0
Views
2K
naquib
naquib
ishtechmech
  • Locked
  • Question Question
How to weld SS 316 to Copper
Replies
4
Views
494
weldstan
weldstan
Karik87
  • Locked
  • Question Question
Welder Qualification with AWS A5.14 ERNiCrMo-3 according to AWS D1.1
Replies
2
Views
559
weldstan
weldstan
AAZOMPA
  • Locked
  • Question Question
TO QUALIFY A WELDING PROCEDURE (PQR
Replies
0
Views
321
AAZOMPA
AAZOMPA

Part and Inventory Search

Sponsor

Back
Top