Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

A216 WCB+PWHT

Status
Not open for further replies.
Dijor007

Dijor007

Mechanical
Joined
Nov 15, 2010
Messages
1
Location
ES
Hi,

Whithout any specific service what are the restriction to made PWHT to A216WCB(pump casing) after welding nozzles.

thks in advance
 
Sort by date Sort by votes
If you have no Code of Construcction, follow good engineering practice - -

1" or greater weld deposit thickness, PWHT at 1100 deg F - 1 hour/inch of weld deposit thickness.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

S Jana
  • Locked
  • Question Question
For P275 NL2 material with a plate thickness greater than 40 mm, Post Weld Heat Treatment (PWHT) requirements
Replies
0
Views
1K
S Jana
S Jana
Kunal88
  • Locked
  • Question Question
Stainless Steel Tube Sheet (for Filters) welding to Carbon Steel Thick Shell (Subjected to PWHT)
Replies
5
Views
339
Dhurjati Sen
Dhurjati Sen
ATUL KHATRI
  • Locked
  • Question Question
PWHT Requirement for piping materials in Hydrogen Service and Wet Sour Service
Replies
11
Views
1K
IFRs
IFRs
78500902
  • Locked
  • Question Question
PWHT on materials
Replies
5
Views
546
fleischfresser
fleischfresser
Jackson306
  • Locked
  • Question Question
F91 Valve PWHT
Replies
3
Views
347
Jackson306
Jackson306

Part and Inventory Search

Sponsor

Back
Top