Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

4 Axis Milling

Status
Not open for further replies.

sasaks

Mechanical
Joined
May 26, 2001
Messages
2
Location
YU
HI EVERYONE!!!!

CAN ANYONE HELP ME? I work in ProE 2000i2 and ProE 2001. I urgently need a tutorial or any other kind of instruction for 4 - axes milling in ProE 2000i and in newer versions. I also need some advice on 4 - axes post-processing.
Thank you in advance.
Sasa Aksentijevic
 
I am also in need of milling tutorials as I am new to Pro/NC. I have downloaded two tutorials related to three axis milling from a site (I don't remember the name). I can send you those if you want.

Amish Bhushan Goel
amg@hitechesoft.com
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top