3D properties for F40 3.1 pcf Flexcore (5052 AL)

[modeldamper]

Hi

I am looking for 3D orthotropic or 3D Anisotropic properties for the honeycomb core F40 3.1 pcf Flexcore (5052 AL)

Does anyone have these properties?

It will be of much helpful.

Thanks

 

[SWComposites]

There is an SAE AMS spec for this core. Don't recall number. It will have thru thickness shear and normal modulus. Use low, near zero values for the Inplane values.

 

[modeldamper]

Thanks SW. I will look into it.