Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
316 Stainless S-N curve
- Thread starter lectrik
- Start date
You'll need to be more specific before even starting. Fatigue varies widely for different alloy and heat treats. "Stainless steel" is not a sufficient description to get any meaningful information.
First get more specific composition information. Even then, I don't have a good answer for publicly available SN curves. My best recommendation is to either engage somebody with that information, or research in an engineering university library.
Brad
First get more specific composition information. Even then, I don't have a good answer for publicly available SN curves. My best recommendation is to either engage somebody with that information, or research in an engineering university library.
Brad
- Thread starter
- #3
All I have is a mil spec. that does not provide tensile strenght for 316 Stainless Forging cold-worked. The material is under Mil-S-7702 Class C. If you have any reference material for Tensile strenght then I could put together a Goodman Diagram.
- Status
Similar threads
- Question
- Locked
- Question
- Locked
- Question
- Locked
- Question