Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

303 SST with Mercury Vapor

Status
Not open for further replies.
tommyh

tommyh

Mechanical
Joined
Apr 25, 2000
Messages
1
Location
US
I am designing a high vacuum manifold that will see low concentrations of Hg vapor and perhaps liquid Hg at or a little above room temperature.  We are currently using 304L and having trouble machining the small ports.  Can I use 303 instead?
 
Status
Not open for further replies.

Similar threads

quizzical1
  • Locked
  • Question Question
Mold growth on 2024 Aluminum and 303 SS
Replies
10
Views
753
Compositepro
Compositepro
Zahib
  • Locked
  • Question Question
SS cladding with Galvanic corrosion issues
Replies
2
Views
851
EdStainless
EdStainless
AZMAG28
  • Locked
  • Question Question
Crushed salt with sand (slurry) Piping specifications
Replies
3
Views
421
shvet
shvet
mrmalcolm
  • Locked
  • Question Question
Which materials are compatible with methanol
Replies
7
Views
3K
MortenA
MortenA
awesomeness
  • Locked
  • Question Question
Cathodic protection with Al-Zn-In anodes of carbon steel / 316L
Replies
3
Views
718
awesomeness
awesomeness

Part and Inventory Search

Sponsor

Back
Top