Making an inflatable air system, and I require a regulator to go from a 3000 psi source to 50 psi. The regulator should not be adjustable and should also include some form of safety pressure relief. Also, it should be small is size and light, inlet and outlet sizes would be 1/4". Anyone have ideas to whom I could talk to about getting this sytem made. Quantities will ramp up to production levels after verification of system.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
300 psi to 50 psi regulator
- Thread starter atowers
- Start date
- Status
Similar threads
- Locked
- Question
- Question
- Locked
- Question
- Locked
- Question