Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
3 button mouse 1
- Thread starter vanpeltnv
- Start date
No.
You have to learn how to use the mouse the Wildfire way.
"Wildfires are dangerous, hard to control, and economically catastrophic."
"Fixed in the next release" should replace "Product First" as the PTC slogan.
Ben Loosli
CAD/CAM System Analyst
Ingersoll-Rand
You have to learn how to use the mouse the Wildfire way.
"Wildfires are dangerous, hard to control, and economically catastrophic."
"Fixed in the next release" should replace "Product First" as the PTC slogan.
Ben Loosli
CAD/CAM System Analyst
Ingersoll-Rand
smokinHawk
Mechanical
i dont think you can set it like ProE 2001, but cntrl + middle mouse button is zoom, shift + middle = pan, middle by its self is rotate.
-
1
- #5
RocketRonnie
Mechanical
ZOOM - CTRL + Middle Mouse button (Move mouse vertically)
TURN - CTRL + Middle Mouse button (Move mouse horizontally)
ROTATE - Middle Mouse button
PAN - SHIFT + Middle Mouse button
Other Options:
View - Orientation - Orient Mode
View - Orientation - Reorient - Dynamic Orient
The Quick Reference guide has useful information on orienting the model:
TURN - CTRL + Middle Mouse button (Move mouse horizontally)
ROTATE - Middle Mouse button
PAN - SHIFT + Middle Mouse button
Other Options:
View - Orientation - Orient Mode
View - Orientation - Reorient - Dynamic Orient
The Quick Reference guide has useful information on orienting the model:
- Status
Similar threads
- Locked
- Question