Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

2D Shell displayed with thickness in Results (Post Processing)

Status
Not open for further replies.
Recon1775

Recon1775

Aerospace
Joined
Jul 24, 2002
Messages
137
Location
US
With NX 9 Advanced Simulation (Nastran) is there a way to display a visual of the thickness of the 2D elements in the post processor results view port?
I'd like to show it for the sake of visual reasons when I show displacements in relation to neighboring elements.

Thanks!
 
Status
Not open for further replies.

Similar threads

H
  • Question Question
NX Flow: Results generator error for Tecplot results
Replies
0
Views
2K
Herwig
H
CAD2015
  • Locked
  • Question Question
NX 2212 - How to hide centerlines in 2D views.....
Replies
2
Views
2K
CAD2015
CAD2015
S
  • Question Question
Define POST-Actions for Loading from different options
Replies
0
Views
1K
sbjw
S
Carbonated
  • Question Question
Distance constraint incompatible with cylindrical
Replies
2
Views
5K
Carbonated
Carbonated
SDETERS
  • Locked
  • Question Question
3D PMI and MBD vs 2D Drawings
Replies
0
Views
659
SDETERS
SDETERS

Part and Inventory Search

Sponsor

Back
Top