SamuraiMike
Electrical
- Aug 30, 2006
- 15
I'm having problems finding a vendor for a .25" semi ridgid copper cable bender. Does anyone have a source? Thanks
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
.25" semi ridgid cable bender?
- Thread starter SamuraiMike
- Start date
- Status
MikeHalloran
Mechanical
I think a 'tubing bender' would work as well.
Mike Halloran
Pembroke Pines, FL, USA
Mike Halloran
Pembroke Pines, FL, USA
- Thread starter
- #4
SamuraiMike
Electrical
- Aug 30, 2006
- 15
I'm not certain, likely 1".
I've heard that tubing benders for 1/4" fuel line will work.
I've heard that tubing benders for 1/4" fuel line will work.
I have a Series 400 that should work.
You don't need a ratchet bender for 1/4-inch work.
Steve
You don't need a ratchet bender for 1/4-inch work.
Steve
- Status
Similar threads
- Locked
- Question