Oct 29, 2007 #1 SamuraiMike Electrical Aug 30, 2006 15 I'm having problems finding a vendor for a .25" semi ridgid copper cable bender. Does anyone have a source? Thanks
I'm having problems finding a vendor for a .25" semi ridgid copper cable bender. Does anyone have a source? Thanks
Oct 29, 2007 #2 MikeHalloran Mechanical Aug 29, 2003 14,450 I think a 'tubing bender' would work as well. Mike Halloran Pembroke Pines, FL, USA Upvote 0 Downvote
Oct 29, 2007 #3 SteveWag Civil/Environmental Dec 11, 2003 348 What is the allowable radius? Steve Upvote 0 Downvote
Oct 30, 2007 Thread starter #4 SamuraiMike Electrical Aug 30, 2006 15 I'm not certain, likely 1". I've heard that tubing benders for 1/4" fuel line will work. Upvote 0 Downvote
Oct 30, 2007 #5 SteveWag Civil/Environmental Dec 11, 2003 348 I have a Series 400 that should work. http://www.northstate.com/ridgid/en-us/dept_23.html You don't need a ratchet bender for 1/4-inch work. Steve Upvote 0 Downvote
I have a Series 400 that should work. http://www.northstate.com/ridgid/en-us/dept_23.html You don't need a ratchet bender for 1/4-inch work. Steve
