Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

1950 Building Code? 2

Status
Not open for further replies.

WWTEng

Structural
Nov 2, 2011
391
Is there any way to determine what the building codes would have been in, say, state of IL in the late 40s & early 50s?
 
Replies continue below

Recommended for you

I believe the state of Illinois fininally adopted a state building code within the last year-check the state's website. Prior to that, each local jurisdiction would have specified which code (if any) they followed. Call the building department of the local jurisdiction to find out. Based on prior experiences, don't be surprised if they say there wasn't an official building code or if there was one, it was loosely followed.
 
If you were out in the "Boonies" - then NOTHING - still the same in Missouri!! Yes - we are modern enough to adopt the IBC code state wide - but outside any major city - there is nobody to enforce it!!!!!
 
Most of the midwest east of the Mississippi was the BOCA and west of the Mississippi was the UBC.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor