Search results for query: *

The anchor points on the text box are only pickable when a frame is applied to it (in Standard Behaviour). As a work-around I could: - duplicate the text - apply a frame to original - position the Leader in the mid left/right location - superimpose the copied text over original and create a...

Hi All, I'd like to know if it's possible to change the location of the leader line at the text box. Currently, it snaps to either top left or top right corner of the text box. Here is what I do: - I have my drawing standard set to ANSI. - I insert Text with multiple lines in it (say 3 or so)...

Create your CS's in sheet 1 and then cut/paste to other sheet.

Hey Kevin, one option you could use is Set Relative Position. Right-click on the view (in the tree), select View Positioning/Set Relative Position. Hope that helps.

If I understand your question correctly... Do your mesh in Advanced Meshing Tools workbench. When defining Advanced Mesh, you get an option to Merge During Simplification, and Min Size. Set your min size to a number larger than 10mm.

Make sure you have connections defined between rivet-plate and plate-plate.

Create a new axis system at the new reference in the part. In the darwing, when creating a view, before you select the reference face, pick the new axis system.

In the Fillet definition window, click on More and select the edge on the 1" dia. piece as a reference for Edges to Keep.

Ryengnut, you beat me to it :)

I don't believe this card is certified (correct me if I'm wrong). This is an "entry-level" video card, I would probably look at at least the 1000-series FX cards. We are running the FX 1300 with no issues (certified). You could take a look at DS website for a listing of certified machines and...

In Overload Properties, uncheck "Use when projecting" instead.

It may be a little tricky if your part is a "good" part with features. If it's a "dumb" solid you could simply move it with a compass to specific location or an axis system.

Instead of Fold/Unfold, use the Unfolding... command. It allows you to specify a referance surface and then pick individual bends to unfold.

Jack, as indicated in Help docs, "You can measure the inertia properties of plane surfaces including DMU sections".

If memory was an issue, try to minimize the use of Virtual Memory on the cnext.exe process (VM Size). Can you open the assembly in Cache mode, and load only the models that are needed in design mode?

One more suggestion...create a new body, then create the volume, that you want to remove, with a pad. Then, use Boolean operation to Remove the new body from the PartBody.

On behalf of TopGun, use "View From 3D" when creating your view. Hope that helps.

Engineering.com offers student version for 150 bucks.

You could try opening the product as a set of CGR files and only bring the ones that you are working on into Design Mode. Use the "Work with the cache system" to enable the CGR creation.

How about...create a Breakout View first and then a Detail View out of that. You'll have to use 'Apply Breakout To' to see it in the Detail view.