Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by 5050t

  1. 5050t

    Selecting tangent surfaces from solid

    Derek! although splitting or sewing is not always an option but your idea is brilliant and it works - thank you!!! something to keep in mind for future design. Cheers Peter
  2. 5050t

    Selecting tangent surfaces from solid

    Hello CATIA Gurus!!! Let me explain my question. I created a tool that will be used to lay-up carbon. The actual contact area between the tool and the carbon plies needs a higher surface finish tolerance. In FT&A we use a colour code system to define surface finish tolerances. This contact...
  3. 5050t

    pattern along curve

    define your points, activate sketcher, select the points from spec tree and click Project 3D Elements! Now these points are linked to a sketch...therefore you can use them in your user pattern. Works like a charm! Ciao! P.
  4. 5050t

    human builder won't remember positions

    Hello! FYI: I use catalogues to store all positions. works really well. Hope this helps. Cheers Peter
  5. 5050t

    Creating Points on CATIA surfaces

    hello wingstress! do this using your GSD lic! To get points: 1. Create planes (click Repeat object after OK) 2. specify number of Instances 3. Intersect the new GeometricalSet with your surface 4. You can now create planes in the other direction and repeat the process or use Points and Planes...
  6. 5050t

    Simple (hopefully) question about Isometric Views in Drafting

    Ciao! Try Tools - Options - Drafting - Layout - View Creation - check "View axis system based on 3D axis system". Not sure if this works because my "company" locked all CATSettings :-( P.
  7. 5050t

    Check lic use on UNIX

    Hello, How do you check who (what user) is using a certain (eg. PEO) CATIA license on a UNIX station. Grazie mille!
  8. 5050t

    Portal freeze when performing Cut link

    Hello CATIA users/admins! Scenario: 1. Start Portal 2. Search for PSN (No CATIA model required) 3. You don't have to open CATIA 4. Create bookmark 5. Expand PSN (eg. All level) 6. Perform Cut Link Operation on some parts Result: Portal will freeze during Cut Link operation! We have: 1. IE6...
  9. 5050t

    Section Cut???

    I just usually generate a temporary CATProduct, insert my CATPart into it and use Sectioning tool in Assembly Design. Then you can save your section as CATPart/IGS....
  10. 5050t

    Extracting surfaces from a CGR

    If you have DMU Optimizer you can get a triangulated surface. Create a silhouette and save as .model. Open .model - copy/paste as result. Hope this helps.
  11. 5050t

    Help with 2D drawing references/links

    Copy the new geometry to the ORIGINAL CATPart and try updating the CATDrawing. You "might" be able to save some views but not the dimensions. Or SaveAs the ORIGINAL CATPart then Copy-Paste the 3D geometry to keep same UUID and replace links. Honestly, I don't think you'll have much luck...
  12. 5050t

    product to part

    movia - If you have R17 you can select "Keep colors and attributes on subelements" from the Product to Part dialog box. This option keeps the visual aspect of the original data. If you do not select Keep colors and attributes on subelements, the whole solid takes the color of the original...
  13. 5050t

    product to part

    YES YOU CAN! 1. Open CATProduct 2. Change color of PartBody(s) or GeometricalSet(s) only! 3. Generate CATPart from CATProduct. Note: If you change color of the "Instances" it will not work! Hope this helps! Peter
  14. 5050t

    STL point limitations

    I did not realize that information, from Eric, was extracted from STL section. Maybe Peter should start reading the online docs himself. Cheers!
  15. 5050t

    STL point limitations

    My test results in Ascii free format: STL - 10,000pts OK! STL - 10,001pts "Too many points for this configuration." DSE - 4,000,000pts+ OK! Therefore, online docs are correct, BUT only for STL licenses not DSE. Maybe our friends in Suresnes should test before posting false information...

Part and Inventory Search

Back
Top