Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Simple (hopefully) question about Isometric Views in Drafting

Status
Not open for further replies.
tdp240

tdp240

Mechanical
Joined
Nov 1, 2005
Messages
49
Location
US
When I create an isometric view in drafting, the coordinate system does not appear, yet I see it in drawings that others create. How do I get the coordinate system to appear next to my part in an isometric view?

WinXP-SP3 / NX5.0.4.1 MP6 / Catia V5r18 / NX I-deas 5.3.0.14
 
Sort by date Sort by votes
Ciao!
Try Tools - Options - Drafting - Layout - View Creation - check "View axis system based on 3D axis system".

Not sure if this works because my "company" locked all CATSettings :-(

P.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

J
  • Locked
  • Question Question
CatiaV5R29 - Drafting standards question
Replies
0
Views
888
javier_mat
J
A
  • Locked
  • Question Question
CATIA v5 DRAFTING
Replies
5
Views
7K
amadali
A
Y
  • Locked
  • Question Question
About copy - paste special - copy with link in product
Replies
3
Views
2K
yamaCad
Y
A
  • Question Question
CATIA V5 DRAFTING/DRAWING TITLE BLOCK SCALE UPDATE
Replies
5
Views
4K
amadali
A
A
CATIA v5 Generative Drafting Drawing Links
Replies
1
Views
1K
MrCATIA
M

Part and Inventory Search

Sponsor

Back
Top