Jan 13, 2004 #1 haynewp Structural Joined Dec 13, 2000 Messages 2,331 Location US Anybody know where to find values for threaded rod bond (pullout strength) in concrete? I can't seem to locate in ACI.
Anybody know where to find values for threaded rod bond (pullout strength) in concrete? I can't seem to locate in ACI.
Jan 13, 2004 #2 JAE Structural Joined Jun 27, 2000 Messages 15,714 Location US I haven't looked directly lately, but did you check ACI Appendix D? Upvote 0 Downvote
Jan 13, 2004 Thread starter #3 haynewp Structural Joined Dec 13, 2000 Messages 2,331 Location US I can find everything in Appendix D except for threaded rods. Upvote 0 Downvote
Jan 13, 2004 #4 jheidt2543 Civil/Environmental Joined Sep 23, 2001 Messages 1,469 Location US Check with Hilti or in their product data handbook. I believe they have values for threaded rod. If not, you might try their Technical Services Department. Upvote 0 Downvote
Check with Hilti or in their product data handbook. I believe they have values for threaded rod. If not, you might try their Technical Services Department.
Jan 14, 2004 #5 ERV Structural Joined Oct 26, 2003 Messages 243 Location US Try Simpson Anchor website, they have a very useful program that can be downloaded for calculating all types of fasteners in concrete: http://www.simpsonanchors.com Upvote 0 Downvote
Try Simpson Anchor website, they have a very useful program that can be downloaded for calculating all types of fasteners in concrete: http://www.simpsonanchors.com