Looking for reccommendations for a structural thermoplastic. Must meet<br>
or exceed these properties:<br>
<br>
-Weldable with high weld strength<br>
-Tensile strength = 30,000 psi<br>
-flexural strength = 50,000 psi<br>
-IZOD impact, notched = 5 ft-lb/in<br>
compressive strength = 30,000 psi<br>
normal op temp = -40 to 200 F<br>
<br>
Any help is greatly welcomed.<br>
or exceed these properties:<br>
<br>
-Weldable with high weld strength<br>
-Tensile strength = 30,000 psi<br>
-flexural strength = 50,000 psi<br>
-IZOD impact, notched = 5 ft-lb/in<br>
compressive strength = 30,000 psi<br>
normal op temp = -40 to 200 F<br>
<br>
Any help is greatly welcomed.<br>