Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Gas emission

Status
Not open for further replies.
BZLAM21

BZLAM21

Petroleum
Aug 12, 2020
61
Hi
Please could an expert explain why we should specify the reference O2 dry condition to apply the flue gas emission limits at GTG stack and boiler stack.
Best reagards.
 
Replies continue below

Recommended for you

Sort by date Sort by votes
Because in future flue gas will be tested at dry conditions. See applicable local methods of manual sampling and measuring.
 
Upvote 0 Downvote
Because it will standardize the values.

= = = = = = = = = = = = = = = = = = = =
P.E. Metallurgy, consulting work welcomed
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Jacky23
  • Locked
  • Question
Who can design a connection for gas 2
Replies
3
Views
731
LittleInch
LittleInch
Lowrentstuff
  • Locked
  • Question
Increasing Raw Natural Gas Dew Point and Molar Flow Rates 2
Replies
10
Views
1K
MortenA
MortenA
Jone k
  • Locked
  • Question
Fired heaters temperature controller with fuel gas controllers
Replies
9
Views
505
georgeverghese
georgeverghese
chillwin
  • Locked
  • Question
Natural Gas and liquid dropout.
Replies
5
Views
1K
LittleInch
LittleInch
balaji28
  • Locked
  • Question
Ash removal from shale oil ( heavy fuel oil + gasoline mixture)
Replies
6
Views
462
georgeverghese
georgeverghese

Part and Inventory Search

Sponsor

Back
Top Bottom