Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Revit Doubts

Status
Not open for further replies.

Manuelato032

Student
Joined
May 17, 2022
Messages
3
Location
ES
Good morning, I am making a single-family house in Revit, the Autodesk program. I am in the roof of the house, this is a flat roof with L shape. The problem comes when I want to give a small slope to the roof so that the rainwater can evacuate and not stay there stagnant. I don't see the option to do it anywhere, I'm doing it with the 2020 version, I hope someone can help me, thank you!![bigears]
 
Good afternoon Manuelato032, in my first years of work I had a similar problem, I spent days looking for the solution and finally I found it. What you have to do to make a flat roof with slope is first select to make a conventional roof and then in the features box you have the option to change the slope, there you can select the slope you need for your flat roof. I hope this helps.
 
Thank you very much, I'll try it tomorrow as I don't have the time right now. Thanks again![peace]
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top