Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Standard for titanium corrosion testing
- Thread starter isoca
- Start date
EdStainless
Materials
And I suggest a little literature search to see what people have used before.
Do you want it to be fully aerated or oxygen free? And of course the most important is the temp.
Will you have crevice samples or plain? Lots of details to work out.
= = = = = = = = = = = = = = = = = = = =
P.E. Metallurgy, consulting work welcomed
Do you want it to be fully aerated or oxygen free? And of course the most important is the temp.
Will you have crevice samples or plain? Lots of details to work out.
= = = = = = = = = = = = = = = = = = = =
P.E. Metallurgy, consulting work welcomed
Jessica Herron
Industrial
Here are ASTM Standards
D1141 Practice for the Preparation of Substitute Ocean Water
D1193 Specification for Reagent Water
G1 Practice for Preparing, Cleaning, and Evaluating Corrosion Test Specimens
G47 Test Method for Determining Susceptibility to Stress-Corrosion Cracking of 2XXX and 7XXX Aluminum Alloy Products
D1141 Practice for the Preparation of Substitute Ocean Water
D1193 Specification for Reagent Water
G1 Practice for Preparing, Cleaning, and Evaluating Corrosion Test Specimens
G47 Test Method for Determining Susceptibility to Stress-Corrosion Cracking of 2XXX and 7XXX Aluminum Alloy Products
EdStainless
Materials
There is a list of standard immersion corrosion tests used by MTI (Materials Technology Institute).
These are at std concentrations and temps and have reported information for many alloys.
Also look in the old Timet lit and see what corrosion testing they refer to.
= = = = = = = = = = = = = = = = = = = =
P.E. Metallurgy, consulting work welcomed
These are at std concentrations and temps and have reported information for many alloys.
Also look in the old Timet lit and see what corrosion testing they refer to.
= = = = = = = = = = = = = = = = = = = =
P.E. Metallurgy, consulting work welcomed
- Status
Similar threads