Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

DL/LL ratio in Live Load Reduction Factor.

Status
Not open for further replies.
NewbieInSE

NewbieInSE

Structural
Joined
Dec 19, 2019
Messages
234
Location
BD
Hello Dear Engineers,

What does this account for? If it remains 1, then it seems that Live Load Reduction Factor is not applied to members (columns).

Thanks.

image_qn949f.png
 
Status
Not open for further replies.

Similar threads

Stockton2008
  • Locked
  • Question Question
How to set displacement ratio (storey drift ratio) check in Etabs
Replies
0
Views
1K
Stockton2008
Stockton2008
H
  • Locked
  • Question Question
Etabs Load case Question
Replies
2
Views
1K
hkngrdk
H
Stockton2008
  • Locked
  • Question Question
How to define ultimate and service load combos in Etabs
Replies
1
Views
2K
Luceid
Luceid
Miladm2
  • Question Question
Issue with Unwanted Load Transfer to Edge Members
Replies
0
Views
2K
Miladm2
Miladm2
Angel Vila
  • Locked
  • Question Question
SEISMIC USER DEFINED LOAD
Replies
3
Views
3K
sticksandtriangles
sticksandtriangles

Part and Inventory Search

Sponsor

Back
Top