Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

PQR for 6010 root / 8010 fill and cap on API 5L Grade B pipe

Status
Not open for further replies.
NDT3RICH

NDT3RICH

Petroleum
Joined
Aug 19, 2015
Messages
12
Location
US
I'm sure this is fairly common, but I am really curious as to what the tensile specimens looked like. I only have access to the WPS, and it seems like there are way too many cracking issues for my liking with this combination.
 
Sort by date Sort by votes
6011 and 7018 is the usual option.

luis
 
Upvote 0 Downvote
For pipelining it used to be E6010 all the way with downhill progression. Don't know why one would use E8010 for such low strength material.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

D
  • Locked
  • Question Question
Internal CRO in PQR - ASME IX
Replies
4
Views
4K
DCitaweld
D
T
  • Question Question
How to joining CRA pipe to CRA pipe? ( Claded incoloy 825, thick 5mm and base material thick 12.7mm)
Replies
12
Views
6K
taliban999
T
D
  • Locked
  • Question Question
Butt weld end preparation between clad and no clad pipe
Replies
3
Views
1K
Dr. Drew
D
EngDM
  • Locked
  • Question Question
Welding A1018 HSLAS to A500 Grade C
Replies
3
Views
3K
EngDM
EngDM
Farhaad Shaik
  • Question Question
Bowstring Steel Pedestrian Bridge Connection Details (Top and Bottom Transverse Members and Diagonals)
Replies
4
Views
13K
gtaw
gtaw

Part and Inventory Search

Sponsor

Back
Top