Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

velocity intialization of two approaching liquid drop collision in air medium (Fluent) ?

Status
Not open for further replies.
Chaitanya07

Chaitanya07

Mechanical
Joined
Jan 28, 2021
Messages
1
Location
IN
how to intialize both droplets with initial velocities, one droplet velocity in positive x direction and another droplet in negative x direction in fluent solver. i defined the zones for each droplets seperately in the domain ,i patched the zones with initial velocity but while simulation the droplets are not moving. what frame of reference should i use, relative to cell zone or absolute?

please see the jpg file of my domain setup and i also attached .wbpj file ,please suggest improvements and corrections.


 
Status
Not open for further replies.

Similar threads

pnomura
  • Locked
  • Question Question
Drop Test in Transient Structural
Replies
1
Views
1K
jamesdean2
jamesdean2
R
  • Locked
Guidance on Settlement Analysis of Steam Generator in Oil Plant Using ANSYS
Replies
0
Views
787
Rabea-19
R
X
  • Locked
  • Question Question
ANSYS mechanical : How to read the dimensions which are defined as function of other dimensions in UGNX as parameters in ANSYS?
Replies
0
Views
1K
xinyu3liu
X
O
  • Question Question
Simulation of a screw connexion
Replies
1
Views
4K
dgeesaman
dgeesaman
nashki
  • Locked
  • Question Question
UDL on the Curve of Elbow
Replies
0
Views
3K
nashki
nashki

Part and Inventory Search

Sponsor

Back
Top