Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
NACE 0175 1990 revision versus latest
- Thread starter Vikram S
- Start date
EdStainless
Materials
The oldest one that I could find quickly is the 2002.
The 1990 was a very short simple document.
= = = = = = = = = = = = = = = = = = = =
P.E. Metallurgy, consulting work welcomed
The 1990 was a very short simple document.
= = = = = = = = = = = = = = = = = = = =
P.E. Metallurgy, consulting work welcomed
Dhurjati Sen
Materials
This is the place to look for what you need:
DHURJATI SEN
DHURJATI SEN
blacksmith37
Materials
It is included in the 1990 Book of Standards , pg627 ,( if there is an old persons where you work). The 1990 issue is 20 pages.
- Status
Similar threads
- Question
- Locked
- Question