Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
ASTM A105N/A350LF2 2
- Thread starter Mohsen_81
- Start date
-
1
- #2
Dhurjati Sen
Materials
It is not a dual material, but dual certified. The material conforms to both the specs.
Since your enquiry was for A350LF2, you need to check whether the MTCs / MTRs conform to ASTM A 350 Gr LF2 only.
DHURJATI SEN
Since your enquiry was for A350LF2, you need to check whether the MTCs / MTRs conform to ASTM A 350 Gr LF2 only.
DHURJATI SEN
- Thread starter
- #3
-
1
- #4
EdStainless
Materials
I have seen material supplied to 4 or 5 different specs at once. As long as it fully meets the requirements for the one that you are concerned with then you are fine.
= = = = = = = = = = = = = = = = = = = =
P.E. Metallurgy, consulting work welcomed
= = = = = = = = = = = = = = = = = = = =
P.E. Metallurgy, consulting work welcomed
- Status
Similar threads
- Locked
- Question