Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Corrosion resistance of Inconel 718, Inconel X750 and Incoloy A286 with dilute sulphuric acid at 70C

Status
Not open for further replies.
ballvalveguy

ballvalveguy

Petroleum
May 12, 2007
30
I am aware that these three metals are not great with sulphuric acid, but I need to specify a spring material that will work in this application. I picked what I consider to be probably the best choices, but if anyone can give me some insight in to which would be the best material to use, I'd appreciate it.
 
Replies continue below

Recommended for you

Sort by date Sort by votes
How dilute?
Have you gone to the Special Metals web site and looked at the data sheets for these alloys?

= = = = = = = = = = = = = = = = = = = =
P.E. Metallurgy
 
Upvote 0 Downvote
NiDI

"Everyone is entitled to their own opinions, but they are not entitled to their own facts."
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

B
  • Question
Corrosion(?) on stainless at a waste water plant
Replies
7
Views
6K
Big_Daddy
B
nabeel3
  • Question
What type of Corrosion 1
2
Replies
25
Views
13K
mfgenggear
mfgenggear
rudiawan .
  • Locked
  • Question
stastitical analysis of calculation of corrosion growth rates
Replies
3
Views
3K
EdStainless
EdStainless
Kabootarman
  • Question
Soft Seats in Acid Gas service
Replies
1
Views
3K
SJones
SJones
Csqiz
  • Locked
  • Question
Sulphuric acid Storage and piping system 2
Replies
8
Views
1K
EdStainless
EdStainless

Part and Inventory Search

Sponsor

Back
Top Bottom