Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

sliding stem valve assembly

Status
Not open for further replies.
johcatrac

johcatrac

Mechanical
Joined
May 3, 2008
Messages
43
Location
CA
Would a manual globe or gate valve with actuator be classified as a sliding stem valve assembly?
 
Sort by date Sort by votes
It depends on the type of actuator & stem assembly for the valve.
But, the manual globe or gate valves are normally with the "screw" stem, not the "sliding " stem.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

EEENGRX
  • Locked
  • Question Question
Valve Stem twisting
Replies
7
Views
2K
EEENGRX
EEENGRX
35jacob35
  • Locked
  • Question Question
Steam Application Valve Stem Material
Replies
1
Views
2K
SPDL310
SPDL310
TiCl4
  • Locked
  • Question Question
Valve Seat/Stem Material for Monomer Service
Replies
7
Views
2K
shvet
shvet
turbo05
  • Locked
  • Question Question
Suggestion for Square thread Stemnut of a non-rising stem gate valve
Replies
3
Views
2K
MintJulep
M
neroverdi41
  • Locked
  • Question Question
Closure and Stem Calculation
Replies
7
Views
5K
neroverdi41
neroverdi41

Part and Inventory Search

Sponsor

Back
Top